₹1200 की Walnut Serving Tray सिर्फ ₹30 में! 🪵 #DIY #Woodworking #Shorts
₹1200 की ट्रे सिर्फ ₹30 में बनाओ!
| Cost | |
|---|---|
| Buying it finished | ₹1,200 |
| Building it yourself | ₹30 |
| You keep | ₹1,170 |
The build and what it costs
इस आसान Woodworking DIY में सीखें कि कैसे बेकार लकड़ी से एक खूबसूरत और प्रीमियम Walnut Wooden Serving Tray बनाई जा सकती है। घर पर कम बजट में असली बढ़ईगीरी तकनीक से बनाएं मजबूत लकड़ी की ट्रे! #Woodworking #DIY #HindiCrafts #Shorts #VibeShow
Retail price for this wooden serving tray runs around ₹1,200. The build described below comes in near ₹30 in materials — roughly 40 times cheaper. The saving is not a trick: it comes from buying raw stock instead of a finished piece, and from doing the shaping by hand.
Tools needed for the serving tray
Everything below is a hand-tool build; no power tools are required.
a carpenter's pencil — a sharp pencil line is what the saw actually follows.
a handsaw — let the saw do the work; pushing hard makes it wander off the line.
a sharp chisel — a dull chisel bruises the wood instead of cutting it.
clamps — a piece that shifts mid-finish ruins the finish.
sandpaper — grit order matters and skipping a step shows through.
wood polish — the polish is what makes the grain read as depth instead of flat colour.
Making the serving tray step by step
मजबूत लकड़ी का सही चुनाव
बाजार की महंगी ट्रे छोड़ो, आज हम वर्कशॉप की पुरानी लकड़ी से शानदार सर्विंग ट्रे तैयार करेंगे।
सटीक नाप और पेंसिल मार्किंग
सबसे पहले स्टील रूलर और पेंसिल लेकर ट्रे के बेस और किनारों की एकदम सही नाप लगाते हैं।
a carpenter's pencil — a sharp pencil line is what the saw actually follows.
आरी से बोर्ड की कटिंग
अब अपनी मार्किंग लाइन पर सीधी कटिंग करेंगे ताकि ट्रे के सभी किनारे बिल्कुल सीधे और बराबर कटें।
हैंड सॉ से सटीक कटाई
बारीक किनारों को हाथ वाली आरी से काट रहे हैं जिससे लकड़ी के जोड़ बिल्कुल साफ और मजबूत बैठें।
a handsaw — let the saw do the work; pushing hard makes it wander off the line.
छेनी से बनाएं सुंदर ग्रूव
तेज छेनी से साइड पैनल पर मजबूत ग्रूव तराशेंगे ताकि पकड़ने के लिए बढ़िया हैंडल की जगह बने।
a sharp chisel — a dull chisel bruises the wood instead of cutting it.
रंदे से लकड़ी करें समतल
अब रंदे की मदद से सतह को छीलकर पूरी तरह सपाट करेंगे जिससे लकड़ी का खुरदुरापन गायब हो जाए।
क्लैंप से जोड़ें सभी हिस्से
सभी कटे हुए हिस्सों को एक साथ जोड़कर हैवी ड्यूटी क्लैंप से पूरी मजबूती के साथ कस देंगे।
clamps — a piece that shifts mid-finish ruins the finish.
मजबूत जोड़ के लिए क्लैंप
दोनों कोनों पर क्लैंप का दबाव बराबर रखेंगे ताकि ट्रे का ढांचा बिल्कुल चौकोर और अटूट बन सके।
clamps — a piece that shifts mid-finish ruins the finish.
सैंडपेपर से हाथ से घिसाई
पहले 120 और फिर 220 नंबर सैंडपेपर से हाथ से घिसकर लकड़ी को एकदम मखमली चिकना बनाएंगे।
sandpaper — grit order matters and skipping a step shows through.
कपड़े से लकड़ी की पॉलिश
मुलायम कपड़े से प्राकृतिक वुड पॉलिश रगड़ते ही लकड़ी के रेशे चमक उठेंगे और शानदार लुक आएगा।
wood polish — the polish is what makes the grain read as depth instead of flat colour.
शानदार ट्रे तैयार, सब्सक्राइब करें
हमारी प्रीमियम सर्विंग ट्रे पूरी तरह तैयार है, ऐसे ही जबरदस्त वुडवर्किंग प्रोजेक्ट्स के लिए तुरंत SUBSCRIBE करें!
Where beginners go wrong
Not clamping before finishing. If the piece can move while you are polishing, you will get uneven patches and they only show up once the light hits it.
Forcing the saw. Pressure bends the blade and the cut drifts off the pencil line. Let the teeth cut at their own pace.
What you end up with
A finished wooden serving tray, sanded and polished, at roughly the material cost stated above. The build time is short — the video below runs the whole process start to finish, which is the fastest way to see the order the steps actually happen in.