₹1500 की Serving Tray घर पर बनाएं सिर्फ ₹50 में! 🪵 #DIY #Woodworking
₹1500 की ट्रे सिर्फ ₹50 में बनाओ!
| Cost | |
|---|---|
| Buying it finished | ₹1,500 |
| Building it yourself | ₹50 |
| You keep | ₹1,450 |
The build and what it costs
इस वीडियो में देखें कि कैसे आप सिर्फ ₹50 के खर्च में ₹1500 की कीमत वाली शानदार डोवटेल जॉइंट्स वाली लकड़ी की सर्विंग ट्रे बना सकते हैं। अपने घर के लिए एक टिकाऊ और स्टाइलिश चीज़ खुद बनाएँ! #Woodworking #DIY #HindiCrafts #Shorts #VibeShow
Retail price for this wooden serving tray runs around ₹1,500. The build described below comes in near ₹50 in materials — roughly 30 times cheaper. The saving is not a trick: it comes from buying raw stock instead of a finished piece, and from doing the shaping by hand.
Tools needed for the serving tray
Everything below is a hand-tool build; no power tools are required.
clamps — a piece that shifts mid-finish ruins the finish.
sandpaper — grit order matters and skipping a step shows through.
wood polish — the polish is what makes the grain read as depth instead of flat colour.
Making the serving tray step by step
₹1500 की ट्रे ₹50 में!
आज हम सिर्फ ₹50 में ₹1500 की कीमत वाली शानदार लकड़ी की सर्विंग ट्रे बनाना सीखेंगे। ये दिखने में जितनी खूबसूरत है, बनाने में उतनी ही आसान।
लकड़ी मापें, निशान लगाएँ
सबसे पहले, हमें अपनी लकड़ी के टुकड़ों को सावधानी से मापना होगा ताकि ट्रे का आकार सही हो। सटीकता बहुत ज़रूरी है।
टुकड़ों में कटाई
अब इन निशानों के आधार पर लकड़ी को छोटे-छोटे टुकड़ों में काटेंगे। ध्यान रहे, कटाई बिल्कुल सीधी और सटीक होनी चाहिए।
डोवटेल जॉइंट तैयार
ट्रे के कोनों को मजबूत बनाने के लिए हम डोवटेल जॉइंट्स तैयार करेंगे। यह ट्रे को टिकाऊ बनाता है और सुंदर भी दिखता है।
छीनी से आकार दें
छीनी का इस्तेमाल करके सावधानी से डोवटेल आकार को लकड़ी पर उकेरेंगे। धैर्य और हाथ का संतुलन बहुत अहम है।
टुकड़ों को जोड़ें, क्लैंप करें
अब इन कटे हुए टुकड़ों को डोवटेल जॉइंट्स के साथ जोड़ेंगे और क्लैंप की मदद से कसकर रखेंगे ताकि जोड़ मजबूत बन सकें।
clamps — a piece that shifts mid-finish ruins the finish.
सतह को प्लेन करें
जोड़ों को चिकना और सतह को समतल बनाने के लिए लकड़ी को प्लेन करेंगे। इससे ट्रे बिल्कुल सीधी दिखेगी।
हाथ से सैंडिंग करें
ट्रे को छूने में मुलायम बनाने के लिए, हम इसे हाथ से सैंडपेपर से घिसेंगे। यह उसकी सतह को चिकना कर देगा।
sandpaper — grit order matters and skipping a step shows through.
पॉलिश लगाकर चमकाएँ
अंतिम चमक और सुरक्षा के लिए, हम एक कपड़े से लकड़ी पॉलिश लगाएंगे। इससे लकड़ी की प्राकृतिक सुंदरता निखर जाएगी।
wood polish — the polish is what makes the grain read as depth instead of flat colour.
तैयार है आपकी ट्रे! Subscribe!
और ये देखिए, हमारी शानदार डोवटेल जॉइंट्स वाली सर्विंग ट्रे तैयार है! ऐसे और अद्भुत DIY प्रोजेक्ट्स के लिए, वाइब शो को सब्सक्राइब करें!
Where beginners go wrong
Not clamping before finishing. If the piece can move while you are polishing, you will get uneven patches and they only show up once the light hits it.
What you end up with
A finished wooden serving tray, sanded and polished, at roughly the material cost stated above. The build time is short, and the steps above are in the order they actually happen in - cut and measure first, then join, then sand before you finish.