VibeShow Workshop

उसने बेकार लकड़ी से ₹400 का Phone Stand ₹20 में बना दिया — बनाने की विधि

₹400 का फोन स्टैंड ₹20 में बनाओ

▶ YouTube पर यह पूरा बिल्ड देखें (Short)

Cost
Buying it finished₹400
Building it yourself₹20
You keep₹380

The build and what it costs

Retail price for this woodworking project runs around ₹400. The build described below comes in near ₹20 in materials — roughly 20 times cheaper. The saving is not a trick: it comes from buying raw stock instead of a finished piece, and from doing the shaping by hand.

Tools needed for the woodworking project

Everything below is a hand-tool build; no power tools are required.

the carpenter's scale — measure twice, cut once is the whole game here.

a handsaw — let the saw do the work; pushing hard makes it wander off the line.

sandpaper — grit order matters and skipping a step shows through.

clamps — a piece that shifts mid-finish ruins the finish.

Making the woodworking project step by step

₹400 का स्टैंड सिर्फ़ ₹20 में

चार सौ का फोन स्टैंड खरीदने वाले हो? रुको। बेकार लकड़ी से यही बीस रुपये में बनेगा।

चुनो: सीधी और सूखी लकड़ी

सीधी, सूखी लकड़ी चुनो। गीली लकड़ी बाद में मुड़कर फोन गिरा देगी।

माप: 15 × 8 सेंटीमीटर

मुख्य टुकड़ा पंद्रह सेंटीमीटर लंबा और आठ सेंटीमीटर चौड़ा रखो।

निशान: 60 डिग्री का कोण

स्केल से साठ डिग्री का निशान लगाओ। यही फोन को सही देखने वाला कोण देगा।

the carpenter's scale — measure twice, cut once is the whole game here.

आरी निशान के बाहर चलाओ

आरी निशान के ऊपर नहीं, उसके बाहर चलाओ। कटने में लगभग एक मिलीमीटर लकड़ी कम होती है।

a handsaw — let the saw do the work; pushing hard makes it wander off the line.

बेस: 8 सेंटीमीटर चौड़ा

अब आठ सेंटीमीटर का बेस काटो। चौड़ा बेस फोन को आगे पलटने से रोकेगा।

a handsaw — let the saw do the work; pushing hard makes it wander off the line.

केबल के लिए छोटी नाली

बीच में चार्जिंग केबल के लिए छोटी नाली बनाओ, ताकि फोन रखते हुए भी चार्ज हो सके।

रेगमाल: 120, फिर 220

पहले एक सौ बीस और फिर दो सौ बीस नंबर के रेगमाल से किनारे चिकने करो।

sandpaper — grit order matters and skipping a step shows through.

गोंद लगाकर 20 मिनट क्लैंप

दोनों टुकड़ों पर लकड़ी का गोंद लगाओ और बीस मिनट क्लैंप से कसकर पकड़ो।

clamps — a piece that shifts mid-finish ruins the finish.

तेल की सिर्फ़ एक पतली परत

अंत में तेल की पतली परत लगाकर पोंछ दो। रंग गहरा होगा, सतह चिपकेगी नहीं।

तैयार: फोन भी चार्ज होगा

ये रहा तैयार स्टैंड। फोन सीधा रहेगा, केबल नीचे से निकलेगी और टेबल साफ दिखेगी।

कचरे की लकड़ी → काम की चीज़

चार सौ की चीज़, बीस रुपये में। बनाओ, अपना परिणाम दिखाओ और ऐसे काम के लिए फॉलो करो।

Where beginners go wrong

Skipping grits. Going straight from coarse to fine sandpaper leaves deep scratches that the polish will highlight instead of hide. Work 120, then 220, and do not rush the last pass.

Not clamping before finishing. If the piece can move while you are polishing, you will get uneven patches and they only show up once the light hits it.

Forcing the saw. Pressure bends the blade and the cut drifts off the pencil line. Let the teeth cut at their own pace.

What you end up with

A finished woodworking project, sanded and polished, at roughly the material cost stated above. The build time is short - the video below runs the whole process start to finish, which is the fastest way to see the order the steps actually happen in.

Abhishek Rajput
Woodworking builds from Indore. Every project here was built and filmed in the workshop.
LinkedIn

ऐसा कुछ बनवाना या बनाना सीखना है?

VibeShow की टीम आपके बिज़नेस के लिए AI content writing, WhatsApp auto-reply setup और 30-दिन का social media pack बनाती है — ₹99 से शुरू, UPI पर पेमेंट, 4 घंटे में डिलीवरी।

VibeShow की सेवाएँ देखेंWhatsApp पर बात करें