₹800 का Beveled Pine Coaster Set सिर्फ ₹30 में! 🪵 #DIY #Woodworking #Shorts
₹800 का कोस्टर सिर्फ ₹30 में बनाओ!
| Cost | |
|---|---|
| Buying it finished | ₹800 |
| Building it yourself | ₹30 |
| You keep | ₹770 |
The build and what it costs
सस्ते पाइन वुड से घर पर बनाएं शानदार बेवेल्ड वुडन कोस्टर सेट। आसान स्टेप्स में सीखें असली कारपेंट्री और फिनिशिंग तकनीक। #Woodworking #DIY #HindiCrafts #Shorts #VibeShow
Retail price for this wooden coaster set runs around ₹800. The build described below comes in near ₹30 in materials — roughly 27 times cheaper. The saving is not a trick: it comes from buying raw stock instead of a finished piece, and from doing the shaping by hand.
Tools needed for the coaster set
Everything below is a hand-tool build; no power tools are required.
pine — pine is soft, cheap and widely available in India, which is why it suits a first build.
the carpenter's scale — measure twice, cut once is the whole game here.
a carpenter's pencil — a sharp pencil line is what the saw actually follows.
a handsaw — let the saw do the work; pushing hard makes it wander off the line.
a sharp chisel — a dull chisel bruises the wood instead of cutting it.
clamps — a piece that shifts mid-finish ruins the finish.
sandpaper — grit order matters and skipping a step shows through.
wood polish — the polish is what makes the grain read as depth instead of flat colour.
Making the coaster set step by step
सही लकड़ी का चुनाव करें
वर्कशॉप से मजबूत पाइन वुड की सूखी लकड़ी चुनकर आज अपने शानदार प्रोजेक्ट की शुरुआत करते हैं।
pine — pine is soft, cheap and widely available in India, which is why it suits a first build.
रूलर से सटीक नाप लें
सबसे पहले कारपेंटर स्केल से लकड़ी पर सही आकार की पूरी नाप अच्छी तरह तय कर लें।
the carpenter's scale — measure twice, cut once is the whole game here.
पेंसिल से सीधी मार्किंग करें
अब रूलर की मदद से पेंसिल चलाकर कटिंग के लिए एकदम साफ और सीधी लाइन बनाएं।
a carpenter's pencil — a sharp pencil line is what the saw actually follows.
निशान पर सावधानीपूर्वक कटिंग करें
आरी से बनाई गई लाइन पर सीधा और बिना दबाव डाले आराम से लकड़ी को काटते हैं।
a handsaw — let the saw do the work; pushing hard makes it wander off the line.
रंदे से सतह समतल करें
अब हैंड प्लेन चलाकर लकड़ी की ऊपरी सतह को एकदम समतल और एकसमान रूप से छीलें।
छेनी से सुंदर बेवेल बनाएं
तेज छेनी की धार से किनारों पर सुंदर ढलान तराशकर एक प्रीमियम बेवेल्ड डिजाइन तैयार करें।
a sharp chisel — a dull chisel bruises the wood instead of cutting it.
क्लैंप से मजबूती से जकड़ें
फिनिशिंग के दौरान लकड़ी हिले नहीं, इसलिए इसे वर्कबेंच पर क्लैंप से अच्छी तरह कस लें।
clamps — a piece that shifts mid-finish ruins the finish.
सैंडपेपर से खुरदरापन हटाएं
अब एक सौ बीस ग्रिट के सैंडपेपर से हाथों द्वारा घिसाई करके सारे खुरदरे रेशे साफ करें।
sandpaper — grit order matters and skipping a step shows through.
बारीक सैंडिंग से मक्खन फिनिश
इसके बाद दो सौ बीस ग्रिट सैंडपेपर से हाथों से रगड़कर सतह को बिल्कुल रेशमी बनाएं।
sandpaper — grit order matters and skipping a step shows through.
कपड़े से पॉलिश लगाएं
साफ सूती कपड़े से वुड पॉलिश लगाकर लकड़ी के खूबसूरत प्राकृतिक रेशों को गहराई से निखारें।
wood polish — the polish is what makes the grain read as depth instead of flat colour.
शानदार कोस्टर सेट तैयार
हमारा प्रीमियम कोस्टर सेट बिल्कुल तैयार है, ऐसे ही असली DIY सीखने के लिए तुरंत सब्सक्राइब करें।
Where beginners go wrong
Skipping grits. Going straight from coarse to fine sandpaper leaves deep scratches that the polish will highlight instead of hide. Work 120, then 220, and do not rush the last pass.
Not clamping before finishing. If the piece can move while you are polishing, you will get uneven patches and they only show up once the light hits it.
Forcing the saw. Pressure bends the blade and the cut drifts off the pencil line. Let the teeth cut at their own pace.
What you end up with
A finished wooden coaster set, sanded and polished, at roughly the material cost stated above. The build time is short — the video below runs the whole process start to finish, which is the fastest way to see the order the steps actually happen in.