₹800 का Hexagonal Wooden Coaster Set सिर्फ ₹30 में! 🪵 #DIY #Woodworking
₹800 का कोस्टर सिर्फ ₹30 में बनाओ!
| Cost | |
|---|---|
| Buying it finished | ₹800 |
| Building it yourself | ₹30 |
| You keep | ₹770 |
The build and what it costs
इस वीडियो में सीखें कैसे पुरानी लकड़ी से घर पर ही एक शानदार Hexagonal Wooden Coaster Set तैयार करें। बिना किसी महंगी मशीन के सिर्फ हाथ के औजारों से बनाएं प्रीमियम कोस्टर्स। #Woodworking #DIY #HindiCrafts #Shorts #VibeShow #WoodCraft #CoasterDIY
Retail price for this wooden coaster set runs around ₹800. The build described below comes in near ₹30 in materials — roughly 27 times cheaper. The saving is not a trick: it comes from buying raw stock instead of a finished piece, and from doing the shaping by hand.
Tools needed for the coaster set
Everything below is a hand-tool build; no power tools are required.
the carpenter's scale — measure twice, cut once is the whole game here.
a handsaw — let the saw do the work; pushing hard makes it wander off the line.
clamps — a piece that shifts mid-finish ruins the finish.
sandpaper — grit order matters and skipping a step shows through.
wood polish — the polish is what makes the grain read as depth instead of flat colour.
Making the coaster set step by step
सही मजबूत लकड़ी का चुनाव
बाजार में मिलने वाले महंगे कोस्टर भूल जाओ, आज वर्कशॉप की मजबूत लकड़ी से शानदार कोस्टर बनाएंगे।
पटरी और पेंसिल से नाप
स्केल और पेंसिल की मदद से लकड़ी पर छह कोनों वाले हेक्सागोनल डिजाइन का सटीक नाप लगा लो।
the carpenter's scale — measure twice, cut once is the whole game here.
कटर से सीधी कटाई करो
अब कटर मशीन चलाकर लकड़ी के बड़े तख्ते को अपने नाप के अनुसार सीधा काट कर अलग कर लो।
आरी से बारीक कटाई करो
हाथ वाली तेज आरी से हर कोने के निशान पर ध्यान से काटकर साफ टुकड़े तैयार कर लो।
a handsaw — let the saw do the work; pushing hard makes it wander off the line.
रंदे से सतह समतल बनाओ
कारपेंटर रंदे की मदद से लकड़ी की पूरी सतह को छीलकर एकदम बराबर और सीधा कर लो।
रुखानी से सुंदर ग्रूव तराशो
तेज रुखानी चलाकर कोनों पर हल्के ग्रूव बना लो, जिससे पानी की बूंदें बाहर ना फिसलें।
क्लैंप से मजबूती से जकड़ो
अब लकड़ी को क्लैंप में कसकर दबा दो ताकि फिनिशिंग के वक्त टुकड़ा जरा भी ना हिले।
clamps — a piece that shifts mid-finish ruins the finish.
सैंडपेपर से हाथ से घिसाई
पहले एक सौ बीस फिर दो सौ बीस ग्रिट सैंडपेपर से हाथ से घिसकर बिल्कुल मक्खन बना दो।
sandpaper — grit order matters and skipping a step shows through.
कपड़े से पॉलिश चमकाओ
मुलायम सूती कपड़े पर वुड पॉलिश लगाकर हल्के हाथों से रगड़ो, लकड़ी की कुदरती चमक निखर जाएगी।
wood polish — the polish is what makes the grain read as depth instead of flat colour.
गर्म कप रखकर टेस्ट करो
अब टेबल पर चाय का गर्म कप रखकर देखो, न टेबल खराब होगी और न कोई दाग पड़ेगा।
शानदार वुडन कोस्टर सेट तैयार
हमारा खूबसूरत वुडन कोस्टर सेट तैयार है, ऐसे ही जबरदस्त DIY सीखने के लिए अभी सब्सक्राइब करो!
Where beginners go wrong
Skipping grits. Going straight from coarse to fine sandpaper leaves deep scratches that the polish will highlight instead of hide. Work 120, then 220, and do not rush the last pass.
Not clamping before finishing. If the piece can move while you are polishing, you will get uneven patches and they only show up once the light hits it.
Forcing the saw. Pressure bends the blade and the cut drifts off the pencil line. Let the teeth cut at their own pace.
What you end up with
A finished wooden coaster set, sanded and polished, at roughly the material cost stated above. The build time is short — the video below runs the whole process start to finish, which is the fastest way to see the order the steps actually happen in.