VibeShow Workshop

₹1400 का Lazy Susan सिर्फ ₹70 में — बनाने की विधि

₹1400 का लेज़ी सुज़ान सिर्फ ₹70 में

▶ YouTube पर यह पूरा बिल्ड देखें (Short)

Cost
Buying it finished₹1,400
Building it yourself₹70
You keep₹1,330

The build and what it costs

मसालों के डिब्बे, सॉस की बोतलें और छोटे बर्तन अलमारी में पीछे छूट जाते हैं, और बाजार में लकड़ी का बना घूमने वाला लेज़ी सुज़ान करीब ₹1400 का मिलता है। सूखी बची हुई लकड़ी और एक छोटा बेयरिंग सेट लगाकर यही ट्रे सिर्फ ₹70 में तैयार हो जाती है। इसमें एक गोल बेस, एक ऊपर की गोल प्लेट और बीच में धुरी होती है, जिस पर पूरी ट्रे आसानी से घूमती है। काम के लिए सूखी समतल लकड़ी, ट्राइ स्क्वायर, पेंसिल, टेबल सॉ, ड्रिल प्रेस, पाम राउटर, छोटा रंदा, ऑर्बिटल सैंडर, लकड़ी का गोंद, बेयरिंग और स्प्रे फिनिश चाहिए। पहले गोल प्लेट का घेरा मार्क करें और टेबल सॉ या जिग से दोनों गोल टुकड़े काटें, हाथ हमेशा ब्लेड से सुरक्षित दूरी पर रखें। किनारों को राउटर से सीधा करें और दोनों प्लेटों की सतह रंदे से हल्की करके सैंडर से चिकनी करें। बीच में गोंद लगाकर पट्टी और धुरी को क्लैंप में कस दें, और ड्रिल प्रेस से बीच में सीधा होल बनाएं। सूखने के बाद बेयरिंग सेट को इस होल में फिट करें, ऊपर की प्लेट रखकर जांच लें कि ट्रे बिना अटके घूमती है। धूल साफ करके स्प्रे फिनिश की दो हल्की परतें दें और हर परत के बीच दस मिनट सुखाएं। तैयार ट्रे पर मसाले, सॉस और छोटे बर्तन रखें, अलमारी का पिछला कोना भी पूरी तरह इस्तेमाल होने लगता है। पूरी विधि हिंदी में, सही औजार, सुरक्षित कटिंग क्रम और हर जरूरी फिनिशिंग स्टेप के साथ दी गई है।

Retail price for this kitchen turntable tray runs around ₹1,400. The build described below comes in near ₹70 in materials — roughly 20 times cheaper. The saving is not a trick: it comes from buying raw stock instead of a finished piece, and from doing the shaping by hand.

Tools needed for the kitchen turntable tray

Everything below is a hand-tool build; no power tools are required.

a carpenter's pencil — a sharp pencil line is what the saw actually follows.

a handsaw — let the saw do the work; pushing hard makes it wander off the line.

clamps — a piece that shifts mid-finish ruins the finish.

Making the kitchen turntable tray step by step

₹1400 का Lazy Susan सिर्फ ₹70 में!

बाजार में यह वुडन लेज़ी सुज़ान करीब ₹1400 का मिलता है, और बची हुई लकड़ी से यही घूमने वाली ट्रे सिर्फ ₹70 में बनेगी।

गोल घेरा मार्क करें

पहले ऊपर की प्लेट और नीचे के बेस का गोल घेरा तय करें, फिर सेंटर से नाप लेकर पेंसिल से साफ मार्किंग करें।

a carpenter's pencil — a sharp pencil line is what the saw actually follows.

दोनों गोल प्लेट काटें

टेबल सॉ से दोनों गोल टुकड़े काटें और हाथ हमेशा ब्लेड से सुरक्षित दूरी पर रखें, पतला कट धीरे-धीरे पूरा करें।

a handsaw — let the saw do the work; pushing hard makes it wander off the line.

किनारे सीधे रिप करें

कटे हुए किनारों को टेबल सॉ पर हल्का रिप करके सीधा करें, ताकि दोनों प्लेट एक जैसी गोल और बराबर नजर आएं।

a handsaw — let the saw do the work; pushing hard makes it wander off the line.

गोंद लगाकर क्लैंप करें

बेस और पट्टी के बीच लकड़ी का गोंद लगाएं और क्लैंप से कसकर दबा दें, जिससे जोड़ पूरी तरह बैठ जाए।

clamps — a piece that shifts mid-finish ruins the finish.

बीच में होल ड्रिल करें

ड्रिल प्रेस पर बिल्कुल सेंटर में सीधा होल बनाएं, इसी होल में आगे बेयरिंग सेट फिट होगा।

clamps — a piece that shifts mid-finish ruins the finish.

किनारे राउटर से साफ करें

पाम राउटर से किनारों को गोल और साफ करें, जिससे ट्रे हाथ में लगते ही प्रीमियम और महंगी लगे।

सैंडर से पूरी सतह चिकनी करें

ऑर्बिटल सैंडर से ऊपर की पूरी सतह चिकनी करें और धूल अच्छी तरह साफ करें, ताकि फिनिश में दाग न पड़े।

स्प्रे फिनिश की दो परतें

स्प्रे फिनिश की दो हल्की परतें दें और हर परत के बीच दस मिनट सुखाएं, इससे लकड़ी का रंग गहरा आता है।

₹70 में तैयार, मसाले सामने

तैयार ट्रे पर मसाले, सॉस और छोटे बर्तन रखें, अब अलमारी का पिछला कोना भी पूरा काम आता है।

Where beginners go wrong

Not clamping before finishing. If the piece can move while you are polishing, you will get uneven patches and they only show up once the light hits it.

Forcing the saw. Pressure bends the blade and the cut drifts off the pencil line. Let the teeth cut at their own pace.

What you end up with

A finished kitchen turntable tray, sanded and polished, at roughly the material cost stated above. The build time is short - the video below runs the whole process start to finish, which is the fastest way to see the order the steps actually happen in.

Abhishek Rajput
Woodworking builds from Indore. Every project here was built and filmed in the workshop.
LinkedIn

ऐसा कुछ बनवाना या बनाना सीखना है?

VibeShow की टीम आपके बिज़नेस के लिए AI content writing, WhatsApp auto-reply setup और 30-दिन का social media pack बनाती है — ₹99 से शुरू, UPI पर पेमेंट, 4 घंटे में डिलीवरी।

VibeShow की सेवाएँ देखेंWhatsApp पर बात करें